Name:
Low frequency accelerometers
Description:
The accelerometer is a device used to measure acceleration
Multi-user: yes (x) no ()
Pieces of equipment: 20
Name:
Sieve shaker with capacity up to 1kg
Description:
Bench sieve shaker with vibration frequency controller. Power 110 / 220V - 50 / 60Hz. Accompanied with lid and bottom
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Sieve shaker with capacity up to 1kg
Description:
Sieve shaker for use with 50X50X10cm square sieves, with capacity for 8 sieves plus cover and bottom. Accompanied with lid and bottom. Power supply 110 / 220V
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Anemometers
Description:
Anemometers are devices that measure the speed of the horizontal wind component, which is essential for calculating energy forecasts
Multi-user: yes (x) no ()
Pieces of Equipment:
Name:
Ultrasound machine
Description:
Portable ultrasonic pulse measuring device with digital display for use in non-destructive testing in concrete. This equipment is used in the indirect determination of uniformity, resistance, cavities, cracks, damage caused by fire or freezing and modulus of elasticity
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Mortars
Description:
The planetary mortar is used to mix cement and mortar. It has a two-speed motor, bowl and paddle (stainless steel beater). Power supply: 220V - 60Hz - Three phase. According to standards: NBR NM 52; NBR 7215.
Multi-user: yes (x) no ()
Pieces of Equipment: 2
Name:
Electronic scale
Description:
Instrument used for mass measurements, which is composed of electronic elements, such as load cells, integrated circuits, microprocessors etc.
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Analytical balance
Description:
Instrument intended mainly for the determination of masses with high precision and under controlled environmental conditions (temperature, humidity, etc.)
Multi-user: yes (x) no ()
Pieces of Equipment: 5
Name:
Concrete mixers
Description:
Concrete mixers are composed of: a drum, where the components of the mortar rotate until the mixture is ready; the engine, responsible for making the drum run; the chassis, which have two wheels and provide support for the equipment to be transported; and the steering wheel, which is on the side and allows moving the concrete mixer to remove the mortar.
This equipment mixes different materials, such as cement, stone, sand and water, until reaching the desired consistency. Its operation occurs from an engine, which does most of the work alone.
Multi-user: yes (x) no ()
Number of pieces of equipment: 7
Name:
Pump vacuum
Description:
The vacuum pump is a device for the production of vacuum or the additional pressure reduction of an existing vacuum, it is used mainly in soil laboratory
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Manual hydraulic pump
Description:
It consists of an oil reservoir, manual pumping unit and external load relief valve, a safety valve located internally, adjusted at the factory with maximum pressure. This hand pump is used for typical high pressure applications, such as oil injection for breaking or removing bearings, tensioning hydraulic nuts, or for laboratory testing applications (rupture, nuts and calibrations)
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Impedance head
Description:
Impedance head consisting of coupled accelerometer and load cell
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Large climate chamber
Description:
Climatic chamber used for thermal insulation with low temperature dissipation
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Carbonation chamber
Description:
Hermetically insulated chamber for dissolving carbon dioxide inside. This equipment is mainly used to evaluate the effect of carbonation on concrete
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Load cells
Description:
A load cell is a transducer that converts the force into a measurable electrical output
Multi-user: yes (x) no ()
Pieces of Equipment: 4
Name:
Centrifuge
Description:
The centrifuge consists of electronic equipment containing test tubes inside, which will undergo centrifugal force in order to quickly separate liquid and solid elements
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Hot plate
Description:
The heating plate is an equipment in which it has a heated platform made of steel, whose function is to heat samples evenly with constant temperature, being able to be digitally controlled
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Hydraulic cylinders
Description:
Hydraulic cylinders obtain the energy from a pressurized hydraulic fluid, which is typically some type of oil. The hydraulic cylinder basically consists of two parts: a cylinder and a movable piston connected to a rod. Hydraulic pressure acts on the piston, with a capacity of 100 ton, to produce linear movement
Multi-user: yes (x) no ()
Pieces of Equipment: 6
Name:
Hydraulic cylinders
Description:
Hydraulic cylinders obtain the energy from a pressurized hydraulic fluid, which is typically some type of oil. The hydraulic cylinder basically consists of two parts: a cylinder and a movable piston connected to a rod. Hydraulic pressure acts on the piston, with a capacity of 200 ton, to produce linear movement
Multi-user: yes (x) no ()
Pieces of Equipment: 2
Name:
Clipgages
Description:
Clipgages for testing the modulus of elasticity of concrete
Multi-user: yes (x) no ()
Pieces of Equipment: 2
Name:
Conductivimeter
Description:
The conductivimeter is a meter designed to measure electrical conductivity in liquids
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Sedimentation cones
Description:
The sedimentation cone consists of a tapered glassware used to determine the natural sedimentation of suspended solids
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Digital deflectometers
Description:
Deflectometer is an equipment used to measure small deformations in specimens submitted to compression and / or flexion
Multi-user: yes (x) no ()
Number of pieces of equipment: 22
Name:
Deionizer
Description:
Deionizer removes mineral salts producing chemically pure water with conductivity equivalent to that of bi-distilled water
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Desiccators
Description:
The desiccator is a laboratory glassware that consists of a closed container that contains a drying agent called a desiccant
Multi-user: yes (x) no ()
Pieces of Equipment: 3
Name:
Distiller
Description:
The distiller is laboratory equipment responsible for the distillation of water for laboratory procedures
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Protein distiller
Description:
Equipment used for protein distillation
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Fork-lift
Description:
Forklift is a machine used to load and unload structural parts and goods on pallets
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Water Bath equipment
Description:
Laboratory water bath equipment has the purpose of heating liquid or solid substances in which it cannot be exposed directly to fire and needs to be heated, the water bath heats slowly and evenly by submerging the container with the sample in another liquid, usually water
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Concrete retraction testing equipment
Description:
Equipment used to evaluate the volume reduction that occurs in concrete, even in the absence of mechanical stresses and temperature variations
Multi-user: yes (x) no ()
Pieces of Equipment:
Name:
Pullout test equipment (with load control rate)
Description:
This system consists of a drill coupled to a 50 mm diameter cup-saw bit, circular inserts with epoxy resin and tapping device. This system has the purpose of determining the adhesion resistance to mortar traction
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Analog sclerometer
Description:
The sclerometer is a portable measuring instrument that makes it possible to make a quick assessment of the condition of a concrete structure as to its strength
Multi-user: yes (x) no ()
Pieces of Equipment: 2
Name:
Digital sclerometer
Description:
The sclerometer is a portable measuring instrument that makes it possible to make a quick assessment of the condition of a concrete structure in terms of its strength. Its reading is performed through the digital display
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Spectrophotometers
Description:
Spectrophotometer is a device whose function is to measure and compare the amount of light absorbed by a given solution. This equipment is used to identify and determine the concentration of substances that absorb radiant energy in a solvent
Multi-user: yes (x) no ()
Pieces of Equipment: 4
Name:
Greenhouse
Description:
Greenhouse consists of a thermally insulated box and a heat source. This equipment aims to accumulate and contain the heat inside, thus maintaining a higher temperature inside than around it
Multi-user: yes (x) no ()
Pieces of Equipment: 4
Name:
Electric resistance strain gauges
Description:
Extensometer is a transducer capable of measuring body deformations. Electric resistance strain gauges are applied in contact measurement to measure length variation or width change
Multi-user: yes (x) no ()
Pieces of Equipment:
Name:
Optical strain gauges
Description:
Extensometer is a transducer capable of measuring body deformations. Optical strain gauges are applied in non-contact measurement to measure variation in length or change in width
Multi-user: yes (x) no ()
Pieces of Equipment:
Name:
Stone material tester extractors
Description:
The extractor is equipped with an electric motor, allowing the extraction of specimens on asphalt, asphalt and concrete floors. Its operation is characterized by being easy to operate, obtaining samples with ease. It has two speed control and mechanical transmission system using crowns and pinion
Multi-user: yes (x) no ()
Pieces of Equipment: 2
Name:
Electric ovens
Description:
Digital temperature controller with scale up to 1,200 degrees. Muffle with heating elements. Power supply 110 or 220 Volts. Ideal for research services, quality control in the laboratory.
Multi-user: yes (x) no ()
Pieces of Equipment: 2
Name:
Printers
Description:
Printer is a device that provides the printing of documents, using paper and ink
Multi-user: yes (x) no ()
Pieces of Equipment:
Name:
Jar-test
Description:
The test jar is a stirrer that has a capacity of 3 samples and 1 liter. The stirring rods and blades are made of stainless steel, with height adjustment, fluorescent lights on the base and electric speed control up to 200 rpm. This equipment is mainly used in tests during water treatment. Its function is to promote rapid and moderate agitation in the samples, facilitating the formation of flakes with the organic matter present in the analyzed water
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Diamond disk cutting machine for concrete and steel specimens
Description:
Saw for cutting concrete, bituminous materials, rocks or refractories. With motorized cooling, pedal for disc displacement and sliding table.
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Digital twisting machine
Description:
Equipment for the study of torsion tests, with the possibility of torsion of specimens until rupture. The torque measurement is performed through a load cell and a microprocessed meter. The torsion angle is obtained through an angle protractor and a revolution counter. Torque is applied manually using a handwheel and an industrial gearbox. The measurement is performed with an instrumented auxiliary shaft, whose deformation is compensated. The measurement can be read in Nm (Newton Metro) on a digital display
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Concrete abrasion testing machines according to ASTM standard
Description:
The abrasion equipment allows to measure the wear suffered by the aggregate when subjected to a certain number of revolutions. The equipment is mainly provided by an endless shaft motor reducer; a quick-connect cover that guarantees efficient sealing; a transmission system generated by engaging the drive disc with the traction disc, which drives the drum in a counterclockwise direction of rotation. Comes with a tray with 12 (twelve) steel balls as recommended in the standard
Multi-user: yes (x) no ()
Pieces of Equipment: 3
Name:
Gas meters
Description:
Responsible equipment for gas measurement in an environment
Multi-user: yes (x) no ()
Pieces of Equipment:
Name:
Relative humidity meters
Description:
The humidity meter is an instrument for measuring relative humidity in a given environment
Multi-user: yes (x) no ()
Pieces of Equipment: 2
Name:
Microcomputers
Description:
A microcomputer is a computer characterized by the presence of a single microprocessor. With this equipment it is possible to manipulate several software needed for engineering analysis
Multi-user: yes (x) no ()
Pieces of Equipment:
Name:
Oversized muffles
Description:
The muffle consists of a metal chamber with an internal lining made of refractory material and equipped with resistances capable of raising the interior temperature to values above 1000 ° C
Multi-user: yes (x) no ()
Pieces of Equipment: 4
Name:
Pacometer
Description:
Electronic locator of metal bars in concrete with digital display. The device locates the bars and shows their diameter and thickness of hardware lengths up to 150mm away from the surface
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Digital caliper
Description:
Digital caliper is an instrument used to measure the distance between two symmetrically opposed sides on an object, by reading the digital display
Multi-user: yes (x) no ()
Pieces of Equipment:
Name:
Phmetro
Description:
Phmetro is a device used for pH measurement. Basically, consisting of an electrode and a potentiometer circuit
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Piezometers
Description:
Apparatus for assessing the compressibility or tension of liquids. It consists of a vertical tube, open on both sides, connected to the water body
Multi-user: yes (x) no ()
Pieces of Equipment:
Name:
Transport gantry with hoist and wheels
Description:
Metal structure with hoists and wheels for testing loads on structures (beams, slabs, etc.)
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Metal reaction gantry with 200 Tf capacity
Description:
Metal structure with a capacity of 200 ton for testing loads on structures (beams, slabs, etc.)
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Fatigue test press
Description:
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Servo-controlled press
Description:
Servo-hydraulic and microprocessed press for concrete testing with a maximum capacity of 200 ton (2MN). It works coupled to a micro-computer, and together with software that allows tests to be carried out with a constant load increment rate and load maintenance, with a high degree of automation and report issuance. It includes an entrance to an extensometry channel, thus allowing, with the use of a suitable extensometer, the determination of the initial tangent module, secant module and stress-strain diagram according to ABNT NBR 8522, with fully programmed application of the load plans and automatic analysis of results at the end of the test.
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Servo-controlled press
Description:
Servo-hydraulic and microprocessed press for concrete testing with a maximum capacity of 150 ton. It works coupled to a micro-computer, and together with software that allows tests to be carried out with a constant load increment rate and load maintenance, with a high degree of automation and report issuance. It includes an entrance to an extensometry channel, thus allowing, with the use of a suitable extensometer, the determination of the initial tangent module, secant module and stress-strain diagram according to ABNT NBR 8522, with fully programmed application of the load plans and automatic analysis of results at the end of the test.
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
COD reactor
Description:
The COD reactor consists of an aluminum block with capacity for several test tubes and a reference temperature probe. This equipment has the function of heating in dry media for small volumes
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Analog dial indicators
Description:
The dial indicator is a measuring instrument by comparison, equipped with a scale and a pointer, connected by different mechanisms to a contact tip
Multi-user: yes (x) no ()
Number of pieces of equipment: 16
Name:
Resistivimeter
Description:
The resistivimeter measures the resistance in a path between two points stuck in the ground. From the measured resistance, the soil resistivity is calculated, which can be used directly to detect liquids, dimension lightning arresters, or, for cathodic protection projects in ducts
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Data acquisition system with 7 Spider 8 modules
Description:
Data acquisition system with 7 Spider 8 modules
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Vibration generation system (formed by shaker, DA-Digital Analog board)
Description:
Vibration generation system (formed by shaker, DA-Digital Analog board)
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Chloride penetration testing system
Description:
Chloride penetration testing system
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Almemo multichannel acquisition systems for different types of reading
Description:
Almemo multichannel acquisition systems for different types of reading
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Instrumentation systems for structures based on fiberoptic technology (Bragg networks)
Description:
Instrumentation systems for structures based on fiberoptic technology (Bragg networks)
Multi-user: yes (x) no ()
Pieces of Equipment: 2
Name:
Precision thermometers
Description:
The thermometer is a device used to measure temperature or temperature changes. It is an instrument composed of a substance that has a thermometric property, that is, a property that varies with temperature
Multi-user: yes (x) no ()
Pieces of Equipment: 2
Name:
Graduated thermometers
Description:
The thermometer is a device used to measure temperature or temperature changes. It is an instrument composed of a substance that has a thermometric property, that is, a property that varies with temperature
Multi-user: yes (x) no ()
Pieces of Equipment:
Name:
High precision displacement transducers
Description:
A resistive transducer consists of a resistor with a moving contact. This equipment converts mechanical displacement into an electrical signal, by varying the length
Multi-user: yes (x) no ()
Pieces of Equipment: 2
Name:
Resistive displacement transducers
Description:
A resistive transducer consists of a resistor with a moving contact. This equipment converts mechanical displacement into an electrical signal, by varying the length
Multi-user: yes (x) no ()
Number of pieces of equipment: 8
Name:
Turbidimeter
Description:
A turbidimeter is an optical device that measures the decrease and the absorbance of the intensity of a light ray passing through a suspension. This equipment is used in the study of water analysis to check its turbidity
Multi-user: yes (x) no ()
Pieces of Equipment: 1
Name:
Vibrographers
Description:
The vibrograph is a device capable of measuring cable displacements and thus providing an estimate of its useful life
Multi-user: yes (x) no ()
Pieces of Equipment:
Name:
Laboratory glassware
Description:
Laboratory glassware are crystal or tempered glass instruments, so measurements are accurate and the container does not react with the substance contained in it
Multi-user: yes (x) no ()
Pieces of Equipment: